KLINGER SINGLE JACKETED GASKETS OPEN STYLE 103

Information:

The most basic type of semi-metallic gasket has a compressible insert enclosed within metallic jacket. The insert material forces the metal to deform to suit the flange surface and effect a seal.

Single jacketed gaskets open Style 103

Constructed of soft filler covered by a metal jacket on both sides and one face. The gasket is ideal for narrow applications or moderate service conditions

Economical

Can be manufactured to suit narrow flanges
Range of materials available

Single jacketed gaskets open Style 103 are the most basic type of semi-metallic gaskets combining the high pressure suitability and blow out resistance of metallic materials with the improved compressibility of soft materials. Metal jacketed gaskets offer an economical seal where sealing faces are narrow and can be produced in a variety of shapes and configurations, making them a good option for heat exchangers.

Corrugated metal jacketed gaskets are a highly versatile family of products, available in wide variety of configurations and suited to a wide range of applications. For improved sealing performance the corrugated gaskets can be partially or completely covered.

Metal Jacketed gaskets can be manufactured to suit a range of chemical environments by the selection of a suitable alloy jacket or core. The fillers can be non asbestos mill board, non asbestos sheet material, Ceramic, Graphite, Mica or PTFE.

Standard thickness is 3.0mm but thickness can vary to suit customer requirements. These gaskets are manufactured either as one piece or as ring rolled construction (bars are welded into place). The ring rolled version is the most commonly manufactured method due to material utilization and ease of production.

Download Data: KLINGER METAL JACKETED GASKETS DOCUMENT

General Properties