THREADED FLANGE SA182 F316L CLASS 900
BÍCH REN SA182 INOX 316 CLASS 900

THREADED FLANGE SA182 F316L CLASS 900
Thông tin:
Vật liệu: ASTM A182/SA182 F316L
Tiêu chuẩn kích thước : ANSI B16.5 Class 900
Size : 1/2″ đến 60
Thông tin sản phẩm:
- Threaded flanges look very similar to Slip-On flanges but the main difference is that the threaded flange has been was bored out to match a specific pipe inside diameter. The backside of this center opening is then threaded with the relevant-sized tapered pipe thread.
- Threaded flanges are used for special circumstances with their main advantage being that they can be attached to the pipe without welding. Sometimes a seal weld is also used in conjunction with the threaded connection.
- Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller pipe sizes.
- Threaded flanges or fitting is not suitable for a pipe system with thin wall thickness, because cutting thread on a pipe is not possible. Thus, thicker wall thickness must be chosen at least equal to schedule 80 of ASME B36.10
Flange Type | Welding Neck flange, Slip-On, Socket Welding, Blind, Thread, Lap-joint, Long Welding Neck, Orifice, All flanges in Raised Face, Flat face and RTJ |
Material | ASTM A105; A350 LF2; A694 F42, F46, F52, F56, A182 F12/F22/F5/F9/ F91; A182 F304/F304L/F316/F316L, etc. |
Size | 1/2”~60”, as the clients’ requests; |
Pressure | Class: 150, 300, 400, 600, 900, 1500, 2500 / PN6,PN10,PN16,PN25,PN40 / 5K,10K,16K,20K,30K |
Standard | ASME B16.5, ASME B16.47, MSS SP43, EN1092,DIN, JIS, ANSI |
Class 900 lb
Pipe | Flange Data | Hub Data | Raised Face | Drilling Data | Unit Weight | ||||||
Nominal Pipe Size |
A | C | D | E | F | G | H | I | J | ||
Outside Diameter |
Overall Diameter |
Flange Thickness min |
Overall Length |
Diameter at Weld Bevel |
Hub Diameter |
Face Diameter |
Number of Holes |
Bolt Hole Diameter |
Diameter of Circle of Holes |
kg/ piece |
|
in mm |
in mm |
in mm |
in mm |
in mm |
in mm |
in mm |
in mm |
in mm |
|||
1/2 | 0.840 21.30 |
4.750 120.6 |
0.880 22.30 |
2.380 60.45 |
0.840 21.30 |
1.500 38.10 |
1.380 35.00 |
4 | 0.880 22.30 | 3.250 82.50 | 1.87 |
3/4 | 1.050 26.70 |
5.120 130.0 |
1.000 25.40 |
2.750 69.85 |
1.050 26.70 |
1.750 44.00 |
1.690 42.90 |
4 | 0.880 22.30 | 3.500 88.90 | 2.56 |
1 | 1.315 33.40 |
5.880 149.3 |
1.120 28.40 |
2.880 73.15 |
1.320 33.50 |
2.060 52.30 |
2.000 50.80 |
4 | 1.000 25.40 | 4.000 101.6 | 3.74 |
1 1/4 | 1.660 42.20 |
6.250 158.7 |
1.120 28.40 |
2.880 73.15 |
1.660 42.20 |
2.500 63.50 |
2.500 63.50 |
4 | 1.000 25.40 | 4.380 111.2 | 4.33 |
1 1/2 | 1.900 48.30 |
7.000 177.8 |
1.250 31.70 |
3.250 82.50 |
1.900 48.30 |
2.750 69.85 |
2.880 73.15 |
4 | 1.120 28.40 | 4.880 123.9 | 5.94 |
2 | 2.375 60.30 |
8.500 215.9 |
1.500 38.10 |
4.000 101.6 |
2.380 60.45 |
4.120 104.6 |
3.620 91.90 |
8 | 1.000 25.40 | 6.500 165.1 | 10.8 |
2 1/2 | 2.875 73.00 |
9.620 244.3 |
1.620 41.10 |
4.120 104.6 |
2.880 73.15 |
4.880 123.9 |
4.120 104.6 |
8 | 1.120 28.40 | 7.500 190.5 | 15 |
3 | 3.500 88.90 |
9.500 241.3 |
1.500 38.10 |
4.000 101.6 |
3.500 88.90 |
5.000 127.0 |
5.000 127.0 |
8 | 1.000 25.40 | 7.500 190.5 | 13.7 |
4 | 4.500 114.3 |
11.50 292.1 |
1.750 44.40 |
4.500 114.3 |
4.500 114.3 |
6.250 158.7 |
6.190 157.2 |
8 | 1.250 31.70 | 9.250 234.9 | 22.5 |
5 | 5.563 141.3 |
13.75 349.2 |
2.000 50.80 |
5.000 127.0 |
5.560 141.2 |
7.500 190.5 |
7.310 185.7 |
8 | 1.380 35.00 | 279.4 11.00 | 37.4 |
6 | 6.625 168.3 |
15.00 381.0 |
2.190 55.60 |
5.500 139.7 |
6.630 168.4 |
9.250 234.9 |
8.500 215.9 |
12 | 1.250 31.70 | 12.50 317.5 | 47.7 |
Các tên gọi khác: bích ren inox 316 class 900, bích ren A182 F316L class 900, bích ren class 900 inox 316, THREADED FLANGE SA182 F316L CLASS 900.
Tab: thegioivalve, thegioimatbich, iwisu